The 4 Types of Home Inspections Explained for Chesterfield Homeowners
Why Home Inspections Fall Into Four Main Categories
Home inspections fall into four groups based on what's happening with your home: buying it, building it, changing it, or dealing with damage. Each type looks at different parts of the house and answers a different question. Picking the right one first saves time and keeps a surprise out of your report.
Most homeowners think a home inspection is one thing. It isn't. The type you need depends on a simple question. What's going on with your home right now?
The team sorts almost every call into four buckets. That's not a sales trick, it's how the work splits. Each category has its own checklist, its own timing, and its own kind of report.
Here's how the four categories break down. Each one ties to a different moment in the life of a house.
- Pre-purchase inspections happen before you close on a home, while you still have time to negotiate or walk away.
- New construction inspections check framing, foundations, and beams at key stages while the house is going up.
- If you're opening walls or adding a room, a renovation inspection looks at the existing structure before work starts.
- Damage and condition inspections come after something already looks wrong, like a wall crack, a sagging floor, or storm damage.
Buying. Building. Changing. Fixing. Once you see the pattern, the right choice usually gets obvious fast.
We see this mix-up all the time. A buyer books a general walkthrough on an older ranch off Clarkson Road. The report comes back with one line: recommend further evaluation by a structural engineer. Now they've got a few days left on their inspection contingency, and the clock is already —
But that's avoidable. If you know a home has foundation questions going in, you can book the right inspection on day one.
Here's what most people miss.
The categories overlap. A 1980s split-level in Chesterfield might need a pre-purchase inspection and a foundation crack inspection in the same visit. And a brand-new build in nearby Wildwood can turn into a damage call if the grading sends water toward the basement. Same house. Different question.
Local soil plays a big part here. Much of west St. Louis County sits on clay that swells when it's wet and shrinks in dry summers. That movement puts steady stress on basement walls and footings. So foundation concerns come up in nearly every category the team handles around Chesterfield. Homes down in Chesterfield Valley add another layer, since the Missouri River floodplain brings its own drainage and settlement issues.
So why bother with categories at all? Because the wrong type gives you the wrong answer. A general visual inspection can flag a crack. It can't tell you if a beam is undersized or if that crack is still moving. That takes a structural engineer and real calculations. And a structural engineer isn't there to test your outlets or check the age of your water heater.
Most people don't realize this until the report is in their hands. The fix is easy, though. Match the inspection to the moment your home is in, and the report will answer the question you have.
What a General Home Inspection Covers
A general home inspection is the one most buyers already know about. It's a visual check of the whole house, from top to bottom. The inspector walks through and looks at what's visible. Then they write up what they find. On a typical Chesterfield home, it takes a few hours.
It's broad on purpose. Think wide net, not deep dive. Under the ASHI Standards of Practice, a general inspector reports on the major systems they can see and safely reach. Here's what that usually covers:
- Roof covering, flashing, and gutters seen from the ground or a ladder
- Siding and grading, plus how water drains away from the foundation
- The parts of the foundation, basement walls, and crawlspace you can see
- Heating, cooling, plumbing, and the electrical panel under normal use
- Windows, doors, and stairs, along with attic insulation where it's safe to get to
That's a lot of ground. And for most houses, it's the right first step.
But "visible" is the key word. A general inspector won't pull drywall or move a loaded bookshelf. They won't measure what a beam can carry. They also aren't licensed to judge whether a crack is structural. So the report often says "recommend evaluation by a structural engineer." That one line is where a lot of buyers get stuck.
The team sees that note on reports almost every week.
Picture a 1980s two-story off Clarkson Road. The general inspector spots a stair-step crack in the basement block wall. He notes it, takes a photo and moves on, that's his job. He can't tell you if it's old shrinkage or active movement. Now the buyer has five days left on the inspection window. And there's a big question mark sitting in the basement.
Chesterfield adds its own twists. Homes in Chesterfield Valley sit on river bottom soil near the Missouri River. Homes up on the bluffs sit on clay that swells after a wet spring. Both can push on foundations in ways a quick visual check can't fully read. Is that crack old news or a warning sign?
Nobody can answer that with a flashlight and a clipboard. That's where a Foundation Crack Inspection or a Pre-Purchase Structural Inspection comes in. A structural engineer looks at the same wall and tells you what's happening. You'll also learn what it would take to fix it.
Don't skip the general inspection, though. It catches the things that cost you money every month, like an aging water heater or a roof near the end of its life. It also shows you where to dig deeper. Most buyers treat it as the finish line. It's really the map for everything that comes after. We've watched people waive a follow-up to save a few days and then —
Well, you can guess how that goes. A sagging floor or a bowed basement wall doesn't get cheaper after closing.
Specialty and Environmental Inspections: Pest, Radon, and Mold
Pest, radon, and mold checks sit outside a standard home inspection. Most buyers find that out after the report comes back. A general inspector might note a stain or a mud tube on the foundation wall. But they won't test the air. They won't trace the moisture to its source either. These are add-on inspections, and you usually have to ask for them by name.
Here's what each one covers.
- Wood-destroying insect (WDI) inspection: looks for termites, carpenter ants, and the damage they leave behind in sills, joists, and trim.
- Radon test: a monitor sits in the lowest lived-in level of your home for at least 48 hours and records gas levels.
- Mold assessment: checks for visible growth and hidden moisture, sometimes with air or surface samples sent to a lab.
Each one answers a narrow question. None of them tell you if the structure is still sound.
Radon is the one people skip most. It's a gas with no smell or color, and it comes up through the soil. The EPA recommends fixing your home if radon tests at 4 picocuries per liter or higher. Basements are where it collects. And Chesterfield has a lot of homes with full basements, from older ranches to newer builds near the Wildhorse Creek area. A short test during your option period is cheap peace of mind.
Mold almost always points to water. So the real question isn't the mold itself. It's where the water's coming from. In Chesterfield, the team sees this most in basements with hairline foundation cracks, poor grading, or downspouts dumping right next to the wall. Humid St. Louis summers make it worse, a damp basement can grow mold in days. Clean the mold without fixing the water and it'll be back by next August.
Termites are a different kind of problem. Subterranean termites are common across eastern Missouri. They eat from the inside out, so the wood can look fine until you press on it.
This is where specialty reports and structural reports cross paths. The team worked with a buyer in Chesterfield last spring whose WDI report flagged old termite damage at the rim joist. The pest company treated it and signed off. But nobody had checked whether that joist could still carry the floor above it. It couldn't, not fully. A sistered joist and a stamped repair detail fixed it before closing. Without that step, the buyer would've inherited a sagging floor and a repair nobody planned for —
So how do you decide what to order? Use this quick sequence.
- Order a WDI inspection on any wood-framed home. Many lenders require one anyway.
- Run a radon test if the home has a basement or crawl space.
- Ask for a mold assessment if you see staining, smell must, or notice past water damage.
- Bring in a structural engineer if any report mentions damaged framing, cracks, or long-term moisture.
That last step is the one most people miss. Specialty inspectors find the symptom. A structural review tells you if the bones of your home were affected.
Frequently Asked Questions
What is the riskiest part of a home inspection?
The riskiest part is often a structural issue that a general inspection can only flag, not explain. Things like foundation cracks, sagging floors, or bowed walls need a trained eye to tell if they are old and stable or still moving. In Chesterfield, clay soil and river bottom ground near the Missouri River make this risk higher. If your report mentions a crack or settlement, a follow-up structural inspection gives you real answers before you close.
What's the difference between a general home inspection and a structural inspection?
A general home inspection is a visual check of the whole house, while a structural inspection digs into one specific concern, like a crack or sagging beam. The general inspector looks at what is visible from the ground or a ladder. A structural engineer measures, calculates, and tells you if something is a real problem. If your Chesterfield home's report flags a crack, that is your cue to book a focused structural check.
How do I know if my Chesterfield home needs more than a general inspection?
You likely need more if your report mentions cracks, uneven floors, or notes to call a structural engineer. Chesterfield homes sit on a mix of clay soil and river bottom ground, both of which can shift and stress a foundation over time. Older homes off Clarkson Road and newer builds near Wildwood have both shown this issue. When in doubt, ask about a foundation or structural follow-up so you know exactly what you're dealing with.
Can I skip a professional inspection and just check the house myself?
You can walk through a home yourself, but you will miss things a trained inspector catches, like early foundation movement or a roof nearing the end of its life. A visual walkthrough does not tell you if a crack is active or if a beam is undersized. Those answers take tools, training, and experience. For anything involving structure or safety systems, it is worth getting a professional opinion before you buy, build, or fix.
What all do inspectors look at during a home inspection?
Inspectors look at the roof, siding, grading, foundation, basement, HVAC, plumbing, electrical panel, windows, doors, and attic insulation, as far as they can safely see. This is standard for a general inspection under ASHI guidelines. They do not move furniture, pull drywall, or test load capacity on beams. If something looks off, like a crack or water stain, that is the point to schedule a more focused structural inspection.
How long does a 4-point inspection take compared to a full home inspection?
A 4-point inspection is shorter because it only checks four systems: roof, electrical, plumbing, and HVAC, usually for insurance purposes. A full general home inspection takes a few hours and covers the entire house, inside and out. If you are buying a home in Chesterfield, a full inspection gives you the bigger picture, while a 4-point is more narrow and insurance-focused.